YOKOGAWA Daqstation DX2000, User Manual

Page: 72 / 366

2-2
IM 04L42B01-01E
2.2 Setting the Time Difference from GMT
Set the time zone of the region in which the DX will be used. Make sure to set this value
if you are using the Internet network functions or the DST function.
Setup Screen
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Menu tab > Time settings .
Setup Items
• Date & Time > Time zone
Set the time zone of the region in which the DX will be used in terms of the time
difference from GMT. Specify a value in the range of –1300 to 1300 (where the first
two digits denote the hour and the last two digits denote the minute). A negative value
indicates that the local time is behind the GMT.
Example: The standard time in Japan is ahead of the GMT by 9 hours. In this case,
enter “900.”