YOKOGAWA Daqstation DX2000, User Manual

Page: 70 / 366

1-58
IM 04L42B01-01E
USB Interface (/USB1 option)
You can connect keyboards, barcode readers , or USB flash memory to two USB ports,
one on the front and one on the back of the DX.
• You can operate the DX using a keyboard or barcode reader.
• You can save measured data and setup data to the USB flash memory and also load
from it.
For the operating procedure, see sections 2.11 and 2.12.
External Input Channels (/MC1 option)
These channels handle measured data of other devices that is read with the
communication function. There are 240 channels available. As with measurement
channels, the data of these channels can be displayed and saved.
For the setting procedure, see sections 10.1 and 10.2.
Temperature Unit
You can set the unit when measuring temperature with the thermocouple or RTD to °C or
°F.
For the setting procedure, see section 3.3.
Custom Display (Release numbers 3 and later)
You can create a custom operation screen.
See the
Custom Display User’s Manual, IM04L41B01-04E .
Multi Batch Function (/BT2 option; release numbers 3 and later)
You can use this function to simultaneously record the measured data from multiple
batches.
See the
Multi Batch (/BT2) User’s Manual, IM04L41B01-03E .
Advanced Security Function (/AS1 option; release numbers 4 and later)
The advanced security option strengthens measurement security with login, audit trail,
digital signature, and other functions.
See the
Advanced Security Function (/AS1) User’s Manual, IM 04L41B01-05EN .
1.10 Other Functions