YOKOGAWA Daqstation DX2000, User Manual

Page: 257 / 366

7-7
IM 04L42B01-01E
Customizing
Actions Using the Event
Action and Remote Control Functions
(/R1 and /PM1 Options)
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
7.2 Setup Examples of Event Action
Example 1: Starting/Stopping the Memory Sampling through Remote Control
(/R1 Option)
Starts/Stops the memory sampling when a signal is applied to remote control input
terminal 2. Use logic box number 1.
• Setup Screen and Setup Items
Press MENU (to switch to setting mode), and select the Menu tab > Timer, Event
action > Event action .
<Operation>
If the input to the remote control input terminal 2 is turned ON when memory sampling
is stopped, memory sampling starts. If the remote control input is turned OFF when
memory sampling is in progress, memory sampling stops.
Example 2: Writing a Message When an Alarm Occurs
Write the message “Channel 1 Alarm” to group 1 when an alarm occurs on channel 1.
Use logic box number 2.
• Setup Screen and Setup Items
Press MENU (to switch to setting mode), and select the Menu tab > Timer, Event
action > Event action .
<Other Settings>
• Set an alarm to channel 1 and output to internal switch 3.
• Register “Channel 1 Alarm” in message number 4.
For the procedure to set the alarm, see section 3.7.
For the procedure to set the message, see section 5.4.