YOKOGAWA Daqstation DX2000, User Manual

Page: 255 / 366

7-5
IM 04L42B01-01E
Customizing
Actions Using the Event
Action and Remote Control Functions
(/R1 and /PM1 Options)
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
Procedure
• Resetting the Relative Timer
1.
In the operation mode, press FUNC .
The FUNC key menu appears.
2.
Press the Timer reset soft key.
3.
Press the soft key corresponding to timer you want to reset. Select All to reset all
timers.
The relative timer is reset.
• Operating Event Switches (Release number 3 or later)
Operating Event Level Switches
You can operate an event level switch using:
• A custom display switch.
• A communication command.
Operating Event Edge Switches
You can operate an event edge switch using:
• The FUNC key (the procedure for operating the switch with the FUNC key is
described below).
• A custom display push button.
• A communication command.
Operating the Event Edge Switch Using the FUNC Key
1.
In operation mode, press
FUNC
.
The FUNC key menu appears.
2.
Press the Edge Switch soft key.
3.
Press the switch number soft key .
The switch will turn on briefly and then turn off again.
• Displaying an Event Level Switch Status List (Release number 3 or later)
Display the status of the event level switch. For the operating procedure, see section
4.5.
• Resetting the Match Time Timer (Release number 3 or later)
Operation ends when a match time timer whose timer action is set to single expires.
To use such a match time timer again, you must reset it.
1.
In operation mode, press FUNC .
The FUNC key menu appears.
2.
Press the
Match T Reset
soft key.
* This soft key appears when a match timer whose timer action is set to single has expired.
3.
Press the soft key with the match time timer number of the timer that you want to
reset.
The match time timer that you specify is reset.
7.1 Setting the Event Action Function
(Including the remote control function of the /R1 and /PM1 options and the USER key)