YOKOGAWA Daqstation DX2000, User Manual

Page: 240 / 366

6-16
IM 04L42B01-01E
6.6 Saving the Screen Image Data (Snapshot)
Save the current screen image data to the CF card or USB flash memory (/USB1 option).
This operation is called
snapshot
, and the screen image data file is called
snapshot data
file .
For a description of the function, see section 1.4.
Procedure
1.
In the operation mode, press FUNC .
The FUNC key menu appears.
2.
Press the Snap shot soft key.
The snapshot data file is saved to the CF card or USB flash memory (/USB1 option). See
“Save Destination“ in “Explanation.”
Image of the soft keys and the message window are not saved.
Note
If you assign the snapshot function to the USER key, you can carry out snapshots in all modes
(operation mode, setting mode, and basic setting mode). However, error messages are not
saved.
Explanation
• File Format
The snapshot data file is in PNG format.
• File Name
See section 1.4.
• Save Destination
Snapshoto data is saved to the CF card and USB flash memory when both are in use.
Note
The save destination of the snapshot data is a CF card only on the recorder with a version 4.15
or earlier.