YOKOGAWA Daqstation DX2000, User Manual

Page: 235 / 366

6-11
IM 04L42B01-01E
Saving and Loading Data
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
2.
Press the Save display or Save event soft key.
The display data or event data is saved to the CF card.
Time
Saved the previous time
Save operation
File File File
Saved this time
• Saving Measured Data Manually (Collectively Storing Unsaved Data)
Automatic saving takes place when Auto save is set to Off (see section 6.2 for details).
You can save to a CF card or to USB flash memory (/USB1 option). The procedure for
saving unsaved data to a CF card is described below.
For the procedure to save data to the USB flash memory, see section 2.12.
1.
Insert the CF card.
A confirmation window containing the message “There is data which is not saved to media.
Do you want to store to media?” appears.
2.
Select Yes and press DISP/ENTER .
The unsaved data in internal memory will be saved to the CF card.
3.
Follow these steps to remove the CF card.
Press FUNC (display the FUNC key menu) > Media eject soft key > CF soft key.
When the message “Media can be removed safely” appears, remove the CF card.
Note
• If there is not enough free space on the storage medium, the message “Not enough free
space on media” appears, and the data is not saved. If this message appears, replace the
storage medium. Then, carry out the procedure again.
• You cannot abort the data save operation while it is in progress.
• Stopping the Recording (Memory Stop)
* For the procedures when using the batch function, see section 6.3.
1.
Press
STOP
. A confirmation window is displayed.
2.
Select Yes using the arrow keys and press DISP/ENTER .
On models with the computation function (/M1 or /PM1 option), select Mem+Math or
Memory , and press DISP/ENTER .
On DXs with the /AS1 advanced security option, if there are alarms upon which the alarm
ACK operation has not been performed, a confirmation message will appear. Perform the
alarm ACK operation as necessary.
The internal memory icon in the status display section changes to the stop icon.
6.4 Starting/Stopping the Recording and Saving the Measured Data, Saving the Measured Data through Key
Operation