YOKOGAWA Daqstation DX2000 User Manual Download Page 154

Page: 154 / 366

4-22

IM 04L42B01-01E

• TOP CHANNEL (Release number 3 or later)

The following example is for when the top channel is set to channel 8. The displayed

scale marker and grid are those of the channel selected as the top channel.

If you switch from the trend history display to another display, the top channel setting

is cleared. Channels other than the top channel are displayed in their assigned order
within their group.

Channel 8

• AUTO SPAN (Release number 3 or later)

Before AUTO SPAN

Using AUTO SPAN for channel ABC-1

Channel ABC-1

4.3 Displaying Past Measured Data (Historical Trend Display)

Summary of Contents for Daqstation DX2000















































































































































































































































































































































































Search results

Summary of Contents for Daqstation DX2000

Reviews:

Related manuals for Daqstation DX2000

Brands by name

Popular brands

YOKOGAWA Daqstation DX2000, User Manual

Search results

Summary of Contents for Daqstation DX2000

Reviews:

Related manuals for Daqstation DX2000

Brands by name

Popular brands