28
IM 04L05A01-02E
Setting Batch Conditions
1.
Press the
Next #/# soft key
to show the menu with [Batch set].
2.
On the DX100P, press the
#9 soft key
. On the DX200P, press the
#8 soft key
.
The Batch setting screen appears.
DX200P
DX100P
3.
Set each item.
DX200P
DX100P
Lot number Use/Not
Use: Use lot numbers
Auto increment
On: Increment the lot number by
1 when a batch of measurements
is completed (set to the next lot
number)
Header 1 to 3
Up to 64 characters
(Headers are saved to data files.)
4.
Press
DISP/ENTER
.
The settings are confirmed.
5.
Press
ESC
to return to the engineering mode menu.
Setting Conditions and Making Measurements