YOKOGAWA CQ1 User Manual Download Page 220

Page: 220 / 268

5-124

<5. Functions of CQ1 Software>

IM 80J01A01-01E

5.9

Channel Setting

(1) Method

Select imaging method

(2) Excitation

Select light source

(3) Emission

Select emission filter

(4) Camera

Select camera (unselectable in previous version)

(5) Z Offset [µm]

Set Z offset of each channel (default: 0.0 (µm))

(6) Add

Add imaging channel. Up to 10 channels can be set.

This button is invalid if 10 channels are already selected.

(1)

(2)

(3)

(4)

(6)

(7)

(8)

(5)

(9)

(10)

Note

<In case of Transmission Illumination (Phase Contrast) is mounted>
If

“PhaseContrast” is selected, phase contrast lens must be selected.

“BrightField” is unselectable.

<In case of Transmission Illumination
                                              (Bright Field/ Phase Contast) is mounted>
  If

“PhaseContrast” is selected, push the lever of transmission

illumination back and select phase contrast lens.
If

“BrightField” is selected, pull the lever of transimission illumination

forward.
<In case of Transmission Illumination is unmounted>

“PhaseContrast” and “BrightField” are unselectable.

Summary of Contents for CQ1













































































































































































































































































Search results

Summary of Contents for CQ1

Reviews:

YOKOGAWA CQ1, User Manual, Page: 220 / 268

Search results

Summary of Contents for CQ1

Reviews: