YOKOGAWA CQ1 User Manual Download Page 183

Page: 183 / 268

<5. Functions of CQ1 Software>

5-87

IM 80J01A01-01E

“ImageViewer” has five windows; (1) Image View, (2) Z Stack, (3)

Channel, (4) Area, and (5) Thumbnail. Common functions of 5 windows

are shown in

①～④

, below.

①

Time

Set the time point to display.

②

Field/Area

“Image View”, “Z Stack” and “Channel” windows are to set “Field”

to display, and

“Area” window is to set “Area” to display.

During measurement, only the ongoing measurement is shown,

thus display settings cannot be changed.

③

Set Z position to display.

During measurement, only the ongoing measurement is shown,

thus display settings cannot be changed.

④

Z Option

Check

“MIP” to display MIP image. Check “Sum” to display Sum

image.

(1)

(2)

(3)

(4)

①

②

③

④

(5)

Summary of Contents for CQ1













































































































































































































































































Search results

Summary of Contents for CQ1

Reviews:

YOKOGAWA CQ1, User Manual, Page: 183 / 268

Search results

Summary of Contents for CQ1

Reviews: