YOKOGAWA CQ1, User Manual, Page: 140 / 268

5-44
<5. Functions of CQ1 Software>
IM 80J01A01-01E
④
Sampling
Select time points for analysis target by interval designated by
“Skip” or total number of time points designated by “Total”.
⑤
Skip
Input interval of time points selection.
⑥
Total
Input total number of time points to select.
⑦
>>
Apply selection range of time points.
⑧
Unselected
Show unselected time points for analysis target. Total number of
unselected time points is shown at the bottom right.
⑨
Selected
Show selected time points for analysis target. Total number of
selected time points is shown at the bottom right.
⑩
[>>], [<<]
Move time points between
“Unselected” <-> “Selected”.
⑪
OK
Fix time points range setting for analysis target.
⑫
Cancel
Cancel time points range setting and close window
(6) Objective Detect Setting
Show the list of current Object Detect Setting.
Name Description
Link Show if the detected object is linked or not.
Checked
Linked
Unchecked Unlinked
Name Show the object name to detect
Reference Ch Show the channel number, light source and BP filters of the object
detect channel.