1-1
Component Names and Functions
IM CA700-02EN
1
2
3
4
5
6
App
Index
1.1 Front Panel, Top Panel, and Rear Panel
Front Panel
Direct keys
Voltage input
terminal
Current/Voltage
output terminal
Current input
terminal
Common terminal
Arrow keys
Press to change values,
move between digits, and
move the cursor.
ENTER key
Press to confirm procedures
and settings.
ESC key
Press to return to the
previous menu or to cancel
the current operation.
Function keys
Press to select the menu items that are
shown at the bottom of the display.
Power on/off key
Press to turn the CA700
on and off.
Backlight key
Turns on and off the LCD
backlight
LCD
Direct Keys
ZERO key
Press to perform zero point calibration for pressure measurement.
HOLD
MIN/
MAX
RELATIVE
SOURCE/
MEASURE
ZERO
HOLD Key
Press to hold the measured value in the display. When you press HOLD, all keys are disabled
except for the HOLD key, the Power ON/OFF key, and the Save and Logging Start function key.
MIN/MAX key
Press to hold the maximum and minimum values in the display or to clear them.
RELATIVE key
Press to display the difference between the measured value and the preset
reference value. When the difference is displayed, “REL” appears in the display.
SOURCE/MEASURE key
Press to switch between source and measure.
Chapter 1
Component Names and Functions
Summary of Contents for CA700
Page 14: ...xii...
