manualshive.com logo in svg

YOKOGAWA CA700-01, User Manual, Page: 97 / 107

Share
Download
YOKOGAWA CA700-01 User Manual Download Page 97

6-10

IM CA700-01EN

6.7  Upgrading the Firmware Version of the 

Pressure Sensor

Operation

1.

  On the top menu screen, use the ▲ or ▼ key to select 

Device Setting

 and press the 

ENTER

 

key.

 

   

2.

  Use the ▲ or ▼ key to select 

Firmware Upgrade

 and press the 

ENTER

 key.

 

   

3.

  To upgrade the internal pressure sensor or external pressure sensor, press 

Internal Sensor

 (F1) 

or 

External Sensor

 (F2), respectively.

 

A message asking whether to upgrade the firmware version will appear.

4.

  To upgrade the firmware version, press the 

ENTER

 key. To cancel the upgrading, press the 

ESC

 key.

 

The firmware version corresponding to that of the CA700 is installed on the pressure sensor.

5.

  After completing the upgrading, the system displays a message prompting you to restart the 

CA700. Press the 

ENTER

 key to restart the CA700.

Explanation

The CA700 contains the firmware version of the pressure sensor that corresponds to that of this 
equipment. Installation of this firmware version of the pressure sensor enables upgrading the internal 
or external pressure sensor.
When the firmware of the CA700 has upgraded to the latest version, the firmware version of the 
pressure sensor contained in the CA700 is also kept up to date. You can download the latest firmware 
version of the CA700 from our website. For details, see our website.
When a connection is established to the pressure sensor in a firmware version earlier than the 
firmware version of the CA700, a message will prompt you to recommend upgrading the firmware 
version on the screen of the CA700.

Summary of Contents for CA700-01












































































































Reviews:

No comments