manualshive.com logo in svg

YOKOGAWA CA700-01, User Manual, Page: 88 / 107

Share
Download
YOKOGAWA CA700-01 User Manual Download Page 88

6-1

IM CA700-01EN

Other Settings

1 

2 

3 

4 

5 

6

7

Index

Chapter 6 

Other Settings

6.1  Setting the Auto Power-Off Feature and LCD 

Contrast and Turning the LCD Backlight On 

and Off

Procedure

Setting the Auto Power-Off Feature and LCD Contrast

1.

  From the top menu, use the ▲ or ▼ key to select 

Device Setting

, and press 

ENTER

.

 

   

2.

 Then, 

use the ▲ or ▼ key again to select 

Device Setting

, and press 

ENTER

.

The Device Setting screen appears.

 

   

Turn auto power-off on and off 

Set the LCD contrast. 

Turn auto power-off on and off

3.

  Press the ▲ or ▼ key to select 

Auto Power Off.

ON and OFF appear on the function menu.

4.

 Press 

ON (F1)

 or 

OFF (F2)

. Selecting ON will enable the auto power-off feature.

Setting the LCD Contrast

5.

 

Press the ▲ or ▼ key to select 

LCD Contrast

.

The numbers 1 to 4 appear on the function menu.

6.

  Press any of the 

1 (F1)

 to 

4 (F4)

 keys. Contrast is lowest at 1 and highest at 4.

Confirming the Settings

7.

 Press 

Setting Done (F5)

. The settings are confirmed.

Turns on and off the LCD backlight.

1.

 Press   on the CA700 front panel. Each time you press the key, the LCD backlight toggles on 

and off.

Summary of Contents for CA700-01












































































































Reviews:

No comments