manualshive.com logo in svg

YOKOGAWA CA700-01, User Manual, Page: 71 / 107

Share
Download
YOKOGAWA CA700-01 User Manual Download Page 71

5-3

IM CA700-01EN

1 

2 

3 

4 

5 

6

7

Index

Remote Control

Setting the USB Function

5.

 

Press the ▲ or ▼ key to select 

USB Function

.

Mass Storage and Comm. appear on the function menu.

 

   

Select to use the CA700 as a USB storage device on the PC. 

To remotely control the CA700 with communication commands 

6.

 Press 

Mass Storage (F1)

 or 

Comm. (F2)

.

7.

 Press 

Setting Done (F5)

. The setting is confirmed, and the Device Setting screen (step 1) 

returns.

8.

  Turn off the CA700 and then turn it back on.

To activate USB connection setting, you need to restart the CA700. If you did not change the USB 
connection setting, you do not have to restart the CA700.

Explanation

Setting the USB Connection

The CA700 has a USB port for hosts (A type) and another for functions (mini-B type). Select which 
connector you want to use. You cannot use the two ports simultaneously.
USB for host: 

Select this option when connecting a USB storage device to the CA700 (see 
section 4.3).

USB for function: 

Select this option when connecting the CA700 to a PC. This is for controlling the 
CA700 from a PC using communication commands and for using the CA700 as a 
mass storage device on the PC.

Setting the USB Function

The USB Function setting is valid when USB Connection is set to Function.
Mass Storage: 

You can use the CA700 internal memory as USB storage device from 
a PC. From a PC, you can access the files that are saved in the CA700 
internal memory.

Comm. (Communication):  You can use communication commands to remotely control the CA700 

from a PC.

5.1  Setting the USB Parameters

Summary of Contents for CA700-01












































































































Reviews:

No comments