Source and Measure
Finishing the Settings
7.
After entering the measurement conditions, press
Setting Done (F5)
.
The screen shown in step 1 appears.
mA MEASURE or V MEASURE
mA LOOP
Changing the Measurement Range
(for mA MEASURE and V MEASURE)
8.
Press
Range (F1)
. The range changes every time you press the key.
Applying Loop Voltage (for mA LOOP)
8.
After step 7, press
Loop On (F2)
.
The F2 key changes to Loop Off, the output status display changes to LOOP POWER ON, and 24 VDC is
applied across the measurement terminals.
Saving Measured Data
9.
Press
Save (F3)
or
Logging Start (F3)
. The measured data is saved.
What appears at F3 varies depending on the data save method.
Note
For details on setting the data save method (Save or Logging), see section 4.1.
2.4 Measuring DC Current and DC Voltage
2-19
IM CA700-01EN
1
2
3
4
5
6
7
Index