2.1 Measuring Pressure
2-4
IM CA700-01EN
Setting the Alarm
23.
Press the ▲ or ▼ key to select
Alarm
.
ON and OFF appear on the function menu.
24.
Press
ON (F1)
or
OFF (F2)
.
25.
If you select ON, press
ENTER
.
The alarm setting screen appears.
Set the lower alarm limit.
Set the upper alarm limit.
Confirms the settings
26.
Use the ▲ or ▼ key to select
Alarm Lower
, and press
ENTER
.
27.
Press the or
key to move to the digit you want to change, press the ▲ or ▼ key to set the
number.
To confirm the value, press
ENTER
.
Likewise, set Alarm Upper.
Note
The decimal point position is the same as the span decimal point position in Scaling.
28.
After entering the values, press
Setting Done (F5)
.
To discard all of the alarm settings, press the
ESC
key.
The system returns to the Display1 Setting display.
Note
The settings are not yet confirmed. To confirm the settings, press
Setting Done (F5)
on the Display1 Setting
display.
Setting the Percentage Display
29.
Press the ▲ or ▼ key to select
%Span
.
ON and OFF appear on the function menu.
30.
Press
ON (F1)
or
OFF (F2)
.
31.
If you select ON, press
ENTER
.
The percentage display setting screen appears.
Set the reference value.
Confirms the settings
32.
Use the ▲ or ▼ key to select
Span Lower
, and press
ENTER
.