manualshive.com logo in svg

YOKOGAWA CA700-01, User Manual, Page: 21 / 107

Share
Download
YOKOGAWA CA700-01 User Manual Download Page 21

2.1  Measuring Pressure

2-2

IM CA700-01EN

5.

  Use the ▲ or ▼ key to select 

P

 or 

EXT P

, and press 

ENTER

.

 

   

Sets the unit 

Turns averaging on and off

Turn scaling on and off and set scaling. 
Turn the alarm on and off and set the alarm. 

Turns the percentage display on and off 

Sets the relative display based on the reference value 

Initializes the settings 

Confirms the settings 

Sets the unit

Turns averaging on and off

Turn scaling on and off and set scaling.
Turn the alarm on and off and set the alarm.

Turns the percentage display on and off

Sets the relative display based on the reference value

Initializes the settings

Confirms the settings

Sets the measurement range

Functuin: EXT P

Functuin: P

 

Setting Measurement Conditions

If necessary, set the measurement conditions.

Setting the Measurement Range (when Function is set to EXT P)

6.

  Use the ▲ or ▼ key to select 

Range

, and press 

ENTER

.

The measurement range options are displayed on the function menu

7.

  Use the function key to select the measurement range.

Setting the Unit

8.

  Use the ▲ or ▼ key to select 

Unit

, and press 

ENTER

.

The unit options are displayed.

9.

  Use the ▲ or ▼ key to select a unit, and press 

ENTER

.

Setting Averaging

10.

 Press the ▲ or ▼ key to select 

Averaging

.

ON and OFF appear on the function menu.

11.

 Press 

ON (F1)

 or 

OFF (F2)

.

Summary of Contents for CA700-01












































































































Reviews:

No comments