IM CA310-02EN
17
Display
1
2
3 4 5
6
7
8
9
10
11
12
13 14
CA310
CA320
CA330
15
16
17
No.
Description
1 Appears in measurement mode
2 Appears in source mode
3 Battery level
4 Appears during sourcing (blinks when sweeping is paused)
5 Appears when the HART/BRAIN communication resistor is
enabled*
6 Sub display. Displays options in setup mode.
7 Sub display unit
8 Output method
Normal output (outputs the specified value): not
displayed
Span check (manual step): SPAN
Step sweep:
Linear sweep:
9 Main display unit
10 Calibration mode (not displayed normally)
11 Appears when auto power off is enabled
12 Main display
13 Selection status of the TC connection terminal
When the thermocouple mini plug terminal is in use: A
When the banana terminal is in use: B
14 RJ sensor setup mode
RJ sensor off: not displayed
When internal RJ sensor is set: RJ
When external RJ sensor is set: EXT RJ
15 Appears when the temperature standard is set to IPTS-68
16 Sensor selection status based on the TYPE key
17 Wiring system. Two-wire: 2W, three-wire: 3W, four-wire: 4W
* Appears only for LOOP POWER even when it is set to ON.
Names and Functions of Parts
