YOKOGAWA av550g, User Manual

Page: 165 / 213

< 10. Other Functions >
10-26
IM 11M12D01-01E
10.7 Parameter Initialization
Parameter settings can be initialized to the factory default settings. Initialization can be done for all
parameters or for individual parameters. The parameters that can be initialized and their defaults are
listed in Table 10.7.
<Initialization procedure>
1) On the basic panel display, touch the Setup key to display the [Execution/Setup] display.
2) Select [Commissioning], next [Others] then [Defaults]. A display like Figure 10.32.1 appears.
3) Select the desired item to be initialized then a display like Figure 10.32.2 appears.
Select [Defaults start] then initialization starts.
4) When initialization completes then you are returned to a display like Figure 10.32.2.
CAUTION
Do not turn off power during initialization. Otherwise, initialization will not be performed properly
Display

Calibration
 Blow back
 mA-outputs
 Alarms

Contacts
 Others
 All data
Enter
Defaults
F10-32-1E.ai
Enter
F10-32-.2E.ai

Defaults start
Defaults All data
Cancel
Figure 10.32.1 Defaults Display Figure 10.32.2 “Initialize All Data” Start Display