YOKOGAWA AQ7280 OTDR User Manual Download Page 34

Page: 34 / 195

2-9

IM AQ7280-01EN

Optical Pulse Measurement (OTDR)

Index

Auto Save

Using the

rotary knob

and

ENTER

, set Auto Save to

OFF

. The following screen appears.

Set auto save (OFF, ON).

Select a drive (Int. Memory, SD card,

USB1, USB2).

Selectable when auto save is ON.

Set the mode (Date, UserDefine).

Selectable when auto save is ON.

Select the save destination folder.

A file list appears. For more information on file

list operations, see section 6.3.

Selectable when mode is set to UserDefine.

Set the file name.

See section 6.5.

• Mode

Select how to specify the save destination folder.

Date: In this mode, folders that are named with dates are automatically created in the

selected drive.

UserDefine: In this mode, specify the save destination folder.

• Destination Folder

Create a folder of your choice in advance in the selected drive, and select this folder as the save

destination folder.

2.1 Setting the Measurement and Analysis Conditions

Summary of Contents for AQ7280 OTDR




































































































































































































Search results

Summary of Contents for AQ7280 OTDR

Reviews:

Related manuals for AQ7280 OTDR

Brands by name

Popular brands

YOKOGAWA AQ7280 OTDR, User Manual

Search results

Summary of Contents for AQ7280 OTDR

Reviews:

Related manuals for AQ7280 OTDR

Brands by name

Popular brands