YOKOGAWA AQ6376 User Manual Download Page 136

Page: 136 / 417

5-39

IM AQ6376-01EN

aveform Display

App

Index

Explanation

Here, the horizontal axis is explained in terms of wavelength.

If the unit of the horizontal axis is frequency or wavenumber, substitute wavelength with

either frequency or wavenumber, respectively.

Markers

Moving Markers

Line markers can be moved to an arbitrary wavelength using the rotary knob, arrow keys,

or numeric key pad. You can also drag the markers with the mouse.

Moving markers can be moved over a waveform to display the marker value in the data

area. If a moving marker is fixed in an arbitrary position, a fixed marker is displayed.

Fixed Markers

Fixed markers are markers fixed to number to which a moving marker was specified. A

maximum of 1024 fixed markers can be set. In addition, fixed markers can be set across

different traces.

Fixed markers are assigned marker numbers in order starting from 001. You can enter an

arbitrary number using the rotary knob, arrow keys, or numeric key pad. A number up to

1024 can be set.

Marker Data in the Data Area

Marker values (wavelength values and level values) for the displayed moving and fixed

markers are shown in the data area.

If there are five or more fixed markers, they cannot all be displayed in the data area. To

view the values of markers that are not displayed, scroll through the display using the

arrow keys. You can scroll when moving markers are ON and active.

Moving marker value - fixed marker value

Wavelength and level values at moving marker

Wavelength and level values of fixed marker 1

Trace with fixed marker 1

Trace with moving marker

(Active trace)

Moving marker

Number displayed on fixed marker

/ CHOP

5.9 Marker Display

Summary of Contents for AQ6376


































































































































































































































































































































































































































Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands

YOKOGAWA AQ6376, User Manual

Search results

Summary of Contents for AQ6376

Reviews:

Related manuals for AQ6376

Brands by name

Popular brands