manualshive.com logo in svg

YOKOGAWA AQ6373, User Manual, Page: 283 / 358

Share
Download
YOKOGAWA AQ6373 User Manual Download Page 283

9-17

IM AQ6373-01EN

Other Operations

1

2

3

4

5

6

7

8

9

10

11

App

Index

Setting the Screen Image Data Output Destination

You can specify the output destination used when the COPY key is pressed. 

1.

  Press 

SYSTEM

. 

2.

  Press the 

MORE 1/4

 soft key. The MORE 2/4 screen is displayed. 

3.

  Press the 

HARD COPY DEVICE

 soft key. The output destination selection menu 

is displayed. 

4.

  Press the 

INTERNAL

 soft key to specify the built-in printer as the output 

destination, or the 

FILE

 soft key to specify a file.

 

 

 

Note

•  The INTERNAL key is not available if no built-in printer is installed. 
•  If you select FILE, files are saved to the current directory, which is set using the FILE key.

9.5  Other Settings

Summary of Contents for AQ6373







































































































































































































































































































































































Reviews:

No comments