4-1
IM AQ1210-01EN
Performing A
veraged
Measurements
11
22
33
44
55
66
77
88
99
10
10
11
11
App
App
Index
Index
4.1 Measuring in TRACE Mode
WARNING
During measurement, light is transmitted from the light source ports. Do not disconnect the
connected optical fiber cables. Visual impairment may occur if the light enters the eye.
French
AVERTISSEMENT
Lorsque instrument génère de la lumière, la lumière est émise à travers les ports de source
lumineuse. Ne pas débrancher les câbles de fibre optique connectés. Des lésions oculaires
peuvent être causées si le faisceau lumineux pénètre l’œil.
Procedure
Averaged Measurement Screen (OTDR screen TRACE mode)
1.
Press
MENU
to display the MENU screen.
For details on the MENU screen, see the Getting Started Guide, IM AQ1210-02EN.
2.
Tap
OTDR
to display the OTDR screen.
Data display screen
Set the wavelength.
See page 4-2.
Laser on indication
Switches the display between
TRACE mode and MAP mode
Averaged measurement in progress indication
Set the pulse width.
See section 2.1.
Save data directly.
See section 4.4.
The OTDR port emitting light
Displays the data
management buttons
See section 9.3.
Utility
See chapter 7.
Set the attenuation.
See sec. 2.1.
Set the distance range.
See section 2.1.
Set the IOR.
See section 2.2.
Set the averaging conditions.
See section 2.1.
Displays the soft key menu
Expands the data display area
Chapter 4 Performing Averaged Measurements
