IM AQ1210-02EN
47
Performing High-Precision Waveform Monitoring in Real-time
3.1, “Performing Real-time Measurement” in the User’s Manual
The real-time measurement waveform display updates the displayed waveform each time an optical fiber cable is measured.
This update rate can be changed according to your application. Before configuring this feature, start real-time measurement according
to the steps on the previous page.
4.
Move the marker to the position where you want to monitor the waveform in detail.
5.
Tap the
Refresh Rate
soft key. The soft key display changes to “Hi-Precision,” and high-precision measurement is enabled.
Cutting the Waveform Display Noise
This feature removes noise at the far-end point.
6.
Tap
Noise Cut
. The soft key display changes to “ON,” and the waveform noise is cut.
Noise floor
Cuts noise
Event waveform
Waveform Measurement
