18-2
IM AQ1200-01EN
18.2 Saving and Loading Data
CAUTION
Do not remove USB memory or turn off the power when the USB memory access indicator is
blinking or when data is being saved or loaded from internal memory. Doing so may damage
the storage medium (USB memory or internal memory) or corrupt its data.
French
ATTENTION
N'enlevez pas un dispositif de mémoire USB et ne coupez pas l'alimentation électrique
lorsque l'indicateur d'accès à la mémoire USB clignote ou lorsque les données sont en train
d'être enregistrées ou chargées à partir d'une mémoire interne. Vous risqueriez
d'endommager le support de stockage (mémoire USB ou mémoire interne) ou les données
qu'il contient.
Procedure
File Operation Screen
When you have selected a feature other than the multi-core loss test from the top
screen or top menu
Press
SETUP
and the
File
soft key. Or, press
SETUP
twice. The following screen appears.
Set the action (Save, Load).
Set the file type.
Set the extension of the file type you want
to save or load. For details, see the
explanation later in this section.
Using the
rotary knob
and
ENTER
,
select the save destination or the file that
you want to load.
Folder path
The number of folders and files in the selected folder
The file name candidate for the next save operation
This indication appears when you set the action to “Save.”
Set the destination drive
(internal memory, USB memory).
Set the file name (see the File Name
Setup screen in the next section).
• This is not displayed when multi-core
fiber measurement is in use.
Saves or loads the file
Whether “Save” or “Load” is displayed
depends on which option you choose for
the Action setting.
