YOKOGAWA 765501 User Manual Download Page 117

Page: 117 / 277

8-4

IM 765501-01E

8.3

Computation Using Equations

Procedure

MEASURE

STORE

AUTO

RANGE

MENU

MATH

NULL

COMPARE

MEASURE

VALUE

LOCAL

POWER

MISC

TIME

KEY LOCK

SHIFT

V I

MODE

AUTO

RANGE

LIMIT

VS IS

MENU

SOURCE

OUTPUT CONTROL

SWEEP

START

ZERO

SOURCE

TRIG

MODE

OUTPUT

RANGE

Ω

RECALL

DISPLAY

ESC

• To exit the menu during operation, press

ESC

at the upper left of the operation

panel.

• In the procedural explanation below, the

phrase “

rotary knob, numeric keys, <,

and >

” are used to refer to the operation

of selecting or setting items or entering
values using the

rotary knob

numeric

keys

, , and keys (BS key and

right arrow key). For details on the
operation using the rotary knob, numeric
keys, , and , see sections 3.8 or
3.9.

Turning Computation ON/OFF

Press

MATH

to display the MATH menu.

Selecting the Computation Definition

Use the

rotary knob

and

keys to select the computation definition file.

The selected file is underlined.

Press the

Select File

soft key to confirm the computation definition file. An

asterisk is placed on the computation definition file that has been confirmed.

Note

If the description in the computation definition file is not correct, the file cannot be selected. In

this case, if the beep sound (see section 11.4, “Turning the Beep Sound ON/OFF”) is turned

ON, a beep sound is generated.

Press the

Math

soft key to select On (compute) or Off (not compute). If On is

selected, the MATH key illuminates, and the soft keys for the parameters that
needs to be specified for the selected computation definition file are displayed.

Note

If you select ON without selecting a computation definition file, an error occurs.

Summary of Contents for 765501






















































































































































































































































































Search results

Summary of Contents for 765501

Reviews:

Related manuals for 765501

Brands by name

Popular brands

YOKOGAWA 765501, User Manual

Search results

Summary of Contents for 765501

Reviews:

Related manuals for 765501

Brands by name

Popular brands