YOKOGAWA 701933 User Manual Download Page 4 | Manualshive

Page: 4 / 21

YOKOGAWA 701933 User Manual Download Page 4

2

IM 701933-01E

Checking the Contents of the Package

If some items are missing or otherwise inconsistent with the contents
description, please contact your dealer or nearest YOKOGAWA representative.

Current probe (model 701933) main body
Manuals 1 set
Soft case

Safety Precautions

This instrument is designed to be used by a person with specialized knowledge.
This instrument meets the requirements of IEC-61010.
The general safety precautions described herein must be observed during
all phases of operation. If the instrument is used in a manner not specified
in this manual, the protection provided by the instrument may be impaired.
YOKOGAWA assumes no liability for the customer’s failure to comply with these
requirements. In addition, before using the probe, read the manuals of the
measuring instrument to thoroughly familiarize yourself with its specifications
and operation.

The following symbols are used on this instrument.

To avoid injury, death of personnel or damage to the instrument, the

operator must refer to an explanation in the User’s Manual or Service
Manual.

Do not apply around or remove from HAZARDOUS LIVE conductors.

«
...
2
3
4
5
6
...
»

Summary of Contents for 701933






















Reviews:

No comments