3
IM 701925-01EN
Combinations of Accessories and Component Names
Adjustment screwdriver
(not included)
Probe unit (length: 1.2 m)
13. Marker tip
(8 colors x 1 each)
1. 10-cm pair leads
Red (+)
Black (–)
2. 5-cm pair leads
3. Micro clip (red,+)
(length 43.5 mm)
4. Micro clip (black,–)
(length 43.5 mm)
Resistor
Resistor
5. Straight pin
6. Angled pin
7. Spring-type
straight pin
12. Ground extension lead
(60 mm)
9. Flanged pin
(9.5 mm)
8. Spring-type
angled pin
11. Retaining cover
10. Contact / Heat-shrink tube
(12 mm) (20 mm)
9. Flanged pin
(9.5 mm)
Heat-shrink tube
(not included)
Probe head
Probe interface unit
Probe cable
Interface
spring pins
BNC output
terminal
+
Heat-shrink tube
(not included)
+
To device under measurement
through various accessories
To oscilloscope with probe interface
Probe interface unit
Latch release lever
(”LOCK”/”UNLOCK”)
Offset voltage adjustment screw
(”ADJUST”)
L
W
(+)
(–)
2. Configuration and Functions