manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 96 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 96

2-58

IM 701210-05E

GO/NO-GO Determination <Sections 11.8 to 11.10>

The GO/NO-GO function is useful when you want to inspect signals and track down

abnormal symptoms on a production line making electronic equipment.  The function

determines whether the waveform is within the preset range and performs a specific

action for a GO or NO-GO result.  There are two types of determinations.

• Zone:

Method in which a waveform zone is set on the screen

• Parameter:

Method in which a waveform parameter range is specified

The following five types of actions can be performed for GO or NO-GO result.

• Print the Screen Image Data (PRINT)

Prints the screen image data to a specified printer.

• Save the Screen Image Data (Image)

Saves the screen image data to the save destination specified in the FILE menu.

• Save the Waveform Data (Save to File)

Saves the waveform data in binary, ASCII, or floating format to the save destination

specified in the FILE menu.

• Beep Sound (Buzzer)

Sounds a buzzer.

• Send Mail

Sends an e-mail message to a specified address.  (when the Ethernet interface option

is installed)

In addition, the determination result can be output externally using signals.

2.7 Waveform Analysis/Search

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments