YOKOGAWA 701210 User Manual Download Page 347

Page: 347 / 747

9-28

IM 701210-05E

Explanation

Print to

When creating a PDF file of the waveform recorded in Chart Recorder mode (T-Y

recording) or X-Y Recorder mode, set the print destination to PDF.

Selecting the Section to Be Output to the PDF File: Window Mag/Window Pos and

Start Point/End Point

Can be specified only in Chart Recorder mode. These are the same as Window Mag/Window

Pos and Start Point/End Point when reprinting on the built-in printer. See page 9-23.

Print Magnification: Print Mag

Can be specified only in Chart Recorder mode. This is the same as Print Mag when

reprinting on the built-in printer. See page 9-23.

Setting the PDF File

Paper Size

Select the paper size from built-in printer size, A3, A4, and A5. If the built-in printer

size is selected, a PDF file is created of an image similar to the printed output on the

built-in printer (A4 size).

Orientation

If the paper size is set to A3, A4, or A5, set the orientation of the PDF file to

Landscape or Portrait.

Number of Divisions per Page: Div/Page

Can be specified only in Chart Recorder mode. If the paper size is set to A3, A4, or

A5, set the number of divisions to be printed per page in the PDF file. The specified

number of divisions is printed per page. The selectable range varies depending on

the paper size, orientation, and gauge (see section 9-11) as follows:

Paper Size

Orientation

Selectable Range of Div/Page
Gauge: OFF

Gauge: ON

Built-In Printer

20 (fixed)

Portrait

1 to 25

1 to 20

Landscape

1 to 40

1 to 35

Portrait

1 to 20

1 to 15

Landscape

1 to 25

1 to 20

Portrait

1 to 10

Landscape

1 to 20

1 to 15

Document Information: Title, Author, Sub Title, and KeyWord

As necessary, enter the title, author, sub title, and keyword of the PDF file to be created.

Color

The PDF file is created in color if ON is selected and monochrome if OFF is selected.

Compression

Select whether to compress the file. If ON is selected, the file is compressed.

However, the generation of the PDF file takes longer than when OFF is selected.

9.9 Creating a PDF File of the Reprint Image

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 347 / 747

Search results

Summary of Contents for 701210

Reviews: