9-18
IM 701210-05E
9.7 Recording X-Y Waveforms (X-Y Waveform Recording)
Setting Whether to Print the Scale
11. Use the
jog shuttle
and
SELECT
to set Scale to OFF or ON.
Setting the Pointer
12. Use the
jog shuttle
and
SELECT
to set Pointer to ON or OFF. If ON is selected,
a pointer indicating the most recent recording position appears on the screen.
Setting the Font Size
13. Use the
jog shuttle
and
SELECT
to set Print Font to Small or Large.
Setting Comments
14. Use the
jog shuttle
and
SELECT
to select Comment. Then, enter the comment
text you wish to print using up to 20 characters according to the procedure in
section 4.2.
Note
•
The comment setting is linked with the PRINT menu > Comment setting.
•
The pointer is not printed during X-Y waveform recording.
Starting/Stopping X-Y Waveform Recording
15. Press
START/STOP
. The waveform acquisitions starts, and the screen shows
the X-Y waveform.
16. Press
START/STOP
. The waveform acquisition stops.
If auto print is turned ON in step 4, the X-Y waveform recording starts when the
data acquisition stops.
Note
Use the Reprint Setup menu (see section 9.8) to execute X-Y waveform recording when auto
print is turned OFF.
Explanation
Sample Rate
Select the sample rate from the following.
5 S/s, 10 S/s, 20 S/s, 50 S/s, 100 S/s, 200 S/s, 500 S/s, 1 kS/s, 2 kS/s, and 5 kS/s
Interpolation
Set the interpolation format to OFF or Line. For details on the interpolation method, see
section 8.2.
Auto Print
Select whether to automatically perform X-Y waveform recording (printing) on the built-in
printer when waveform acquisition is stopped.