manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 291 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 291

7-25

IM 701210-05E

Acquisition and Display

7

7.9 Using the Voice Memo Function

• When Fixed Is Selected

There are two record methods.

Recording by Using the PUSH Switch on the Earphone Microphone

10.

Record the voice memo by pressing the PUSH switch on the earphone

microphone.  When the recording is finished, proceed to step 12.

Note

When Fixed is selected, the voice memo is recorded for the time specified by Rec Time by
pressing the PUSH switch once.  The PUSH switch does not have to be held down.

Recording Using the Voice Memo Menu

10.

Record the voice memo by pressing the 

Rec Start 

soft key.  The voice memo is

recorded for the time specified by Rec Time.  When the recording is finished,

proceed to step 12.

Note

When Fixed is selected, the Rec Start soft key display does not change even while recording
is in progress.

5-s recordings are possible 
up to 20 times.

Voice memory indicator

Waveform for 
recording a 
voice memo

Event 
waveform

0 s

100 s

Indicates the record time of 
voice memos.  As time elapses, 
the indicator turns red

1

.

1.  When the screen color setting
    (see section 17.4) is set to default.

Note

•

An icon 

 appears at the upper left corner of the screen while voice memo recording is

in progress.

•

Of the waveform data stored to the acquisition memory using the history memory function
(see section 11.1), the voice memo data is stored only for the newest waveform data.
Only event waveforms are stored for waveforms other than the newest waveform.  Thus,
voice memo cannot be played even if the waveform data is loaded using the history
memory function.

Stopping the Waveform Acquisition

12.

Press 

START/STOP

.  Waveform acquisition stops.

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments