manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 216 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 216

5-56

IM 701210-05E

Explanation

Turning ON/OFF the Bit Display

You can specify whether to display the waveform for each bit.

Bit Display Position: Bit Mapping

• Fixed: A space is allocated for bits that are turned OFF.

• Auto:

A space is not allocated for bits that are turned OFF.

Only the bits that are turned ON are displayed in order from the top.

A1

A3

A2

A4

A5

A6

A8

A1

A3

A2

A4

A5

A6

A8

Fixed (when bit 7 of LOGIC A is OFF)

Auto (when bit 7 of LOGIC A is OFF)

Setting Labels for Each Bit

Alphanumeric characters that can be entered: Up to 8 characters

5.20 Setting Logic Waveforms

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments