1-2
IM 2560A-01EN
Rear Panel
Power inlet
Connect the power cord.
→ sec. 3.3
Nameplate
GP-IB port
Used when controlling
the 2560A remotely
from a PC through the
GP-IB interface
→ ch. 9
External RJ sensor input terminal
Used to connect an external RJ sensor
→ sec. 3.6, 6.6
USB port (type B)
• Used when writing user-defined files for thermocouple and RTD temperature output
from a PC to the 2560A (USB mass storage)
→ sec. 6.5
• Used when controlling the 2560A remotely from a PC through the USB interface
(USB-TMC)
→ ch. 11
Ethernet port (100BASE-TX/10BASE-T)
Used when controlling the 2560A remotely from a PC through the Ethernet interface
→ ch. 10
Inlet holes
• Do not block the inlet holes when installing the 2560A.
→ sec. 3.2
• Check the filter periodically to see that it is not clogged.
→ sec. 15.10
Functional ground terminal
Shields the measurement lead
at ground potential.
Top and Bottom Panels
Outlet holes
Do not block the outlet
holes when installing the
2560A.
→ sec. 3.2
Top panel
Bottom panel
Rear legs
→ sec. 3.2
1.1 Panels
