13-11
IM 2553A-01EN
Troubleshooting, Maintenance, and Inspection
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
13.7 Self-Test
Procedure
1
.
Turn the
RANGE
dial to select SETUP.
The SETUP menu appears.
RANGE dial
1. Select SETUP.
The SETUP indicator turns on.
2.
Turn an
output setting
dial to select TEST.
3.
Flip the
POLARITY
switch down.
EXEC appears.
4.
Flip the
POLARITY
switch down again.
The self-test starts.
POLARITY switch
Output setting dials (use any)
2. Select TEST.
3. 4. Execute a self-test.
Explanation
You can execute a self-test. While the self-test is in progress, a test number is displayed.
• When a self-test completes successfully, “DONE” will be displayed.
• If an error is detected, an error code will be displayed.
Error code
Note
• For details on error codes, see section 13.3.
• If multiple errors occur, the error codes are displayed alternately.
