YODA COMMUNICATIONS, INC.
www.yoda.com.tw
500-meter 100Mbps LAN Extender
EL500 Kit
The EL500 KIT is born to break the limitation of Ethernet transmission of 100M and extends any networking
devices up to 800M over cost-effective CAT5e cable. Furthermore, the EL500 KIT is completely transparent
to protocols, codes, and applications, ensuring its great compatibility with any TCP/IP device and its
management software. It is a perfect solution for extending TCP/IP signal to extra remote camera.
Features:
l
To send and extend TCP/IP signal over CAT5e/6 cable
l
Distance support: 500 meters at 100Mbps, 800 meters at 10Mbps
l
Support 10BASE-T, 100BASE-TX, 100BASE-T1 standard.
l
Support Auto MDI/MDI-X.
l
Support Full duplex and half duplex mode.
l
Support EEE Energy-Efficient Ethernet.
l
Built-in 1.5KV (Line to Line) surge protection.
Transmission Distance Chart:
The transmission distance report below is tested through the COMMSCOPE 57535-2 (CAT5e 24AWG)
cables.
Mode
Data Rate
Transmission Distance
100BASE-T with EEE
100Mbps
100M
100BASE-TX
100Mbps
130M
100BASE-T1
100Mbps
300M
Long Reach 100
100Mbps
500M
10BASE-T with EEE
10Mbps
100M
10BASE-T
10Mbps
250M
Long Reach 10
10Mbps
800M
※
The distance may vary by installation conditions, quality of cables, and the performance of connecting
devices.
※
10BASE-T / 100BASE-TX and Long Reach 100Mbps mode use 2 pair wire to transmit
※
100BASE-T1 and Long Reach 10Mbps mode use 1 pair wire to transmit only
※
When EEE mode is enabled, the transmission distance of 100BASE-TX and 10BASE-T will be shortened
