2. Presentation
1: Micro-B USB socket 3: Yocto-led
2: Yocto-button
4: Satellite reception led
5: Antenna connector
2.1. Common elements
All Yocto-modules share a number of common functionalities.
USB connector
Yoctopuce modules all come with a micro-B USB socket. The corresponding cables are not the most
common, but the sockets are the smallest available.
Warning: the USB connector is simply soldered in surface and can be pulled out if the USB plug acts
as a lever. In this case, if the tracks stayed in position, the connector can be soldered back with a
good iron and using flux to avoid bridges. Alternatively, you can solder a USB cable directly in the
1.27mm-spaced holes near the connector.
Yocto-button
The Yocto-button has two functionalities. First, it can activate the Yocto-beacon mode (see below
under Yocto-led). Second, if you plug in a Yocto-module while keeping this button pressed, you can
then reprogram its firmware with a new version. Note that there is a simpler UI-based method to
update the firmware, but this one works even in case of severely damaged firmware.
www.yoctopuce.com
5
Summary of Contents for Yocto-GPS
