Yoctopuce Micro-USB-Hub-V2, User Manual

Page: 5 / 16

www.yoctopuce.com 1
1. Introduction
The Micro-USB-Hub-V2 is a very small USB hub (42x28mm) allowing do-it-yourself enthusiasts to
connect up to four USB 2.0 peripherals to a single USB cable. It was conceived to be placed inside
devices, while taking up a minimum of space. This hub was designed mainly to connect Yoctopuce
modules, but it can very well be used with other USB 2.0 Hi-Speed, Full-Speed, or Low-Speed
peripherals. The Micro-USB-Hub-V2 is a
multi-TT hub, this allows better performance than a regular
single TT hubs when several USB 1.1 devices, such a Yoctopcue products, are connected.
The Micro-USB-Hub-V2
Yoctopuce thanks you for buying this Micro-USB-Hub-V2 and sincerely hopes that you will be fully
satisfied with it. The Yoctopuce engineers have put a large amount of effort to ensure your Micro-
USB-Hub-V2 is easy to install anywhere.If you are nevertheless disappointed with this product, do
not hesitate to contact Yoctopuce support.
1
1
support@yoctopuce.com