20
Insulate the joint of the pipes and secure. Incomplete or improper insulation may lead to condensate leakage.
Push the pipe inside to prevent it from placing undue force on the front grille.
Connecting the Drain Hose
Insert the supplied drain hose into the socket of the drain pan.
Fully insert the drain hose into the socket until it adheres and seals.
With a Multi indoor unit, install as described in the installation manual supplied with the outdoor unit.
Lift the sensor securing plate, remove the front metal plate cover, and connect the wire to the terminal board.
1. Open the cover of electric box of indoor unit.
2. Route the communication line across the rubber ring.
3. Connect the communication line to terminal D1 and D2 on the wiring board of indoor unit.
4. Secure the communication line with the wire clamp on the electric box. Pull wires to make sure that they are
attached securely, then secure the wires with a wire retainer.
