YING ELECTRONICS TOUCHWIN TP Series, User Manual

Page: 61 / 264

Software Parts
3-2. Edit
t” and “private unit’.
“Edit” menu is used for carrying out operations of components. This menu contains “Cut”, “copy”,
“paste”, “public uni
“ ” 1
)
Cut
o om ents from the project and places it on the clipboard. To accomplish this, select
mponent and then choose
s pull-down menu.
2) Copy
Rem ves the c pon
component(s), then click cut under the edit menu; you may also right-click the co
“
cut
”
in it
“ ”
the
e also right-click then component(s) and then choose “copy” in its pull-down menu.
Copy the component(s) to the clipboard. To accomplish it, select component(s), then click “copy” under
exit m nu, you may
The differences between “Copy” and “Cut” are that, when cut component(s), it will disappear, while, when
copy component(s), it will still exist.
3) Paste “ ”
the contents of the c Place lipboard at the insertion point, it is used to match “Copy” and “Cut”. After
ut”, you can click “Paste” to displace or copy the original component(s). clicking “Copy” and “C
4) “ ”Public unit
, click “public unit”
nder the edit menu; also, you may right-click on the components and choose “public unit” in its pull-down
enu.
) Private unit
It is used for applying a certain component to all the project screens. To accomplish it
u
m
“ ”
is only used after a certain component that has been set public. It has the opposite function from “Public
nit” and it can be used in the current screen only. When use it, select a certain component, click “Private
nit” under the edit menu; you may also right-click the component and choose “Private Unit” in its
ull-down menu. After accomplishing, this component will be only saved in the current active screen and
eleted in other screens.
5
It
U
U
p
d
51