YING ELECTRONICS TOUCHWIN TP Series, User Manual

Page: 48 / 264

Software Parts
2-2-2 Downloading Data
After editing, connect 9-pin RS-232 port of PC and TP download 9-pin port with download cables. Then
confirm that TP has been powered with +24V DC. Click or from File>Download Data to download
data. There will pop out a download window to Prompt download process.
If “Time out, check table please” appear ,please re-download
Note Make sure that TP series touch screen can not be powered off while downloading screen data.
When the transmission finished, a pop-up dialog box will appear to show all the project screens have been
transferred.
Cut off the power supply of display. Then pull out the cable TP-SYS-CAB0 and connect PLC and the PLC
port in TP with communication cable.
Electrify PLC and the display, then you can do data monitoring and other operations under normal
munication. Pay attention that incorrect communication param com eters and connection can lead to failed
munication and there will appear such words “communicating” ,which show that TP is communicating
TP and PLC can not communicate normally, please check following items:
odel in project should be selected according to the operating one.
2) Communication Cable should be connected.
3) Communication Cable should be connected in the right way.
4) PLC Communication parameters should be set correctly.
5) PLC and display should be electrified.
6)If you still can not find the reason, please contact with suppliers to get help.
com
with PLC.
If
1) PLC m
38