YING ELECTRONICS TOUCHWIN TP Series, User Manual

Page: 129 / 264

Software Parts
5-10. Text Display
“Text display” is used to display the register data in the form of text in the touch screen. So we can display
text more easily. We can see its intuitionistic advantage when save different files or do the relevant
operations according to different names. Its properties are as same as Digital Display.
Difference between “Text Display” and “Digital Display”: “Text Display” can show data in the form of
Text while “Digital Display” shows data directly. Here we illustrate this in the following figure.
1) Click Text Display part “ ” and place it on the screen, as shown below:
en its property dialog box 2) Op
Set length of display Text
Note
: One word is composed by two bytes, one character’s size is one byte and one register’s size is one
word. Thus, you can set the register’s number (namely the length)to change the content of displayed
characters .As shown above, the register’s number is 1 as default setting ,then it will display two characters.
119