YING ELECTRONICS TOUCHWIN TP Series, User Manual

Page: 112 / 264

Software Parts
5-2. Dynamic Text
the industry control process, there may be several status of machine. By these dynamic texts the machine
an display different status. This makes the operation much convenient and can improve the work
fficiency.
) Click
In
c
e
“ 1 ” icon in the Part toolbar.
) Move cursor to the screen, click the left mouse button to place it on the screen （ click the right button or
ress ESC key to cancel place ）
) After selecting the Dynamic Text ,double-click to open its property dialog box (as shown below).There
“Data” in “Object” property page.
as internal space of touch screen or
ommunicating device.
series), the display can monitor the changing
ta type, normally we select “Word” stands for separate word
2
p
3
are “Station”, “Object”,
Station: stands for the device communicating with display. The setting values are different as station
numbers are not the same when using different devices. Normally, we use default value need not to change
user. by
Object: Setting a number for the register which can be set
c
Take D0 for example (internal data register of Thinget XC
value of D0 directly.
Data: Namely da
4) Each register corresponds to 16 status
， each part’s corresponding value is 0~15, when the register’s
value is 0 ， the dynamic text will display the content of text 0.The rest m be deduced by analogy. You can
also select align type and text frame, as shown below
ay
102