NR120 5G Router User Manual
19
This function is used to detect whether the Internet connection is active, if users
set it and when the Router detect the connection is inactive, it will redial to
users' ISP immediately to make the connection active. If the network is busy or
the user is in
private network
, we recommend that Router mode will be better.
Detection Method:
None:
do not set this function
Ping:
Send ping packet to detect the connection, when choose this method,
users should also configure "Detection Interval", "Primary Detection
Server IP" and "Backup Detection Server IP" items.
Route:
Detect connection with route method, when choose this method,
users should also configure "Detection Interval", "Primary Detection
Server IP" and "Backup Detection Server IP" items.
PPP:
Detect connection with PPP method, when choose this method, users
should also configure "Detection Interval" item.
Detection Interval:
time interval between two detections, unit is second
Primary Detection Server IP:
the server used to response the Router’s
detection packet. This item is only valid for method "Ping" and "Route".
Backup Detection Server IP:
the server used to response the Router’s
detection packet. This item is valid for method "Ping" and "Route".
Note:
When users choose the “Route” or “Ping” method, it’s quite
important to make sure that the “Primary Detection Server IP” and “Backup
Detection Server IP” are usable and stable, because they have to response the
detection packet frequently.
Force reconnect:
this option schedules the pppoe or 3G reconnection by killing
the pppd daemon and restart it.
Time:
needed time to reconnect
STP
STP (Spaning Tree Protocol) can be applied to loop network. Through certain
