Linhai Yida Electronics Co., Ltd
3
45C-0183
Page 1: ... check place the rudder blade at 0 adjust the transmitter to 0 Note the 0 of rudder blade and transmitter must be correctly checked or the precision will be reduced later install meter and connect the power DC24V cable must be correct next connect the cables of transmitter to rudder meter blue for A green for B black for GND red for 12v Turn power on after finishing the correct connection the mete...
Page 2: ...t 2 Light on but meter no display check 12v and WORK indication and transmitter First check 12v on rudder meter second check transmitter connection if Work indication flashes the rudder meter is broken 3 Too big or small angle between left and right rod Adjust the rod 4 0 not correct Check 0 of transmitter Correctly adjust the 0 of rudder blade and transmitter Ⅴ Installment Dimension ...
Page 3: ...Linhai Yida Electronics Co Ltd 3 45C 0183 ...
Page 4: ...Linhai Yida Electronics Co Ltd 4 RD 0183 ...
