YES Watch Cozmo series, Instruction Manual

Page: 3 / 26

Basic Button Functions
M - The Mode button is used to cycle through these modes:
SHOWING TIME (for HOME / AWAY locations)
SET HOME > SET AWAY > SET TIME
SETLCD RING > STOPWATCH > TIMER
S/M CALC > PET COUNTDOWN
S - The Set & Data review button is used to enter selected mode and to set data. In normal running mode it is
used to review time data and toggle between HOME / AWAY locations.
L - The Lock & Alarm button is used to lock settings, enter and activate the alarm, override DST settings
manually and other time data review functions.
B - The Backlight button is used to turn the light on, turn the Digital time off and step backwards during setting
sequence.
C - The Crown is used to set the 24-hour solunar hand.
Please note that for the watch to operate correctly
location and time must be set.
How to set
HOME and AWAY locations
The watch is pre-programmed for 583 locations worldwide
through the years 2000 - 2099.
The city listing is in alphabetical order.
- Push M once until display reads SET HOME, then push S to enter the alphabetical setting sequence. The letter
A will flash.
- Push S until you reach the first letter of your city, then push L to enter the city listing. Continue pushing S until
your city appears. (If you pass your selection, push B to go backwards.) Then push L to lock the selection. The
display will read WAIT and then it will display location and time.
- To set your AWAY location push M twice until display reads SET AWAY and then follow the same procedure
as above.
- To toggle back and forth between time for HOME and AWAY locations, push S twice, quickly.
Pushing M anytime during setting procedures,
or pushing no button at all for 2 minutes,
will revert the watch to previous setting.
How to Set location by latitude
and longitude