Yenista Optics TUNICS T100S-HP, User Manual, Page: 18 / 66

Product Presentation
18 TUNICS T100S-HP User Manual
1.3.2 Description of the Rear Panel
Figure 2: Rear Panel
MAINS
The MAINS module includes:
• The mains power switch
• The power cord connection
• The fuse drawer
Monitor (Scaled) Outputs
• Sync : BNC connector for motor Sync.
• λ : BNC connector for wavelength monitoring.
You can also use this output connector as a trigger, as explained in section Activating/
Deactivating the λ Output as a Trigger, p. 49 .
• P : BNC connector for power monitoring.
• I : BNC connector for current monitoring.
TTL Outputs
• Mod. Sync : BNC connector for modulation sync (TTL output).
• Mod. Out : BNC connector for modulation output (TTL output).
For a detailed description on particular connectors, see section Using the Auxiliary Inputs
and Outputs, p. 43.
Remote interlock Input
(SUBD-9 connector)
for laser safety
GPIB Remote Control
(IEEE 488.1 connector)
Modulation Sync
Modulation Output
TTL Outputs
Power Switch
Fuse Drawer
Power Cord
Connector
MAINS
High-frequency
Modulation Input
Low-frequency
Modulation Input
RS-232 C
Remote Control
Fine Scanning and
Coherence Control
Input
Wavelength
or Trigger
Power
Current
Motor Sync
Monitor (scaled)
Outputs