Installing and Connecting the OSICS Multifunction Platform
22
OSICS User Manual
2.2
Connecting the OSICS Mainframe to a Power Source
Subject
The OSICS Mainframe is equipped with a self-regulating power supply. For voltage
specifications, see section
OSICS Mainframe Technical Specifications, p. 16
Before Starting
Procedure
1.
Make sure the power switch is set to
O
.
2.
Connect one end of the provided power supply cable to the mains socket located on
the rear panel and plug the other end to the proper voltage wall socket outlet (to
know the voltage requirement, see section
OSICS Mainframe Technical Specifications,
•
Make sure the product power source does not apply more than 265
Volts RMS between the supply conductors or between either of the
supply conductors and the ground.
•
To avoid the possibility of injury, make sure the socket outlet in which
the power supply cable will be plugged is equipped with a protective
ground contact, and that the electrical installation fulfills the local
safety requirements.
•
The OSICS Mainframe has a chassis connected to ground via the
power supply cable. A protective ground connection by way of the
grounding conductor in the power cable is essential for safe
operation.
•
The OSICS Mainframe is not designed for outdoor use. To avoid the
possibility of injury, do not expose the product to rain or excessive
moisture. Do not operate the product in the presence of flammable
gases or fumes.
WARNING