YEC YZF-R6 SS KIT 2004, Manual

Page: 56 / 73

– 52 –
3-5 Rear Arm Installation Procedure
1. Tighten to specification beforehand the bracket using the bolt and nut on top
of the shock absorber . (Tightening torque: 44 Nm, 4.4 m·kg)
2. Tighten to specification the shock absorber to the frame, using the nut .
(Tightening torque: 52 Nm, 5.2 m·kg)
3. Attach the adjust bolt on the right inside of the frame and lightly tighten it.
4. Mount the rear arm to the frame, insert the shaft from the left, and tighten to
specification the bolt toward the rear arm. (Tightening torque: 6 Nm, 0.6 m·kg)
•
Apply grease to the inner surface of the bearing and to the bush portion of the
bearing .
•
Apply grease to the outer surface of the shaft .
•
Fill in grease for the lip and bearing inside the cover .
5. Tighten the nut and washer to specification. (Tightening torque: 95 Nm, 9.5
m·kg)
6. By referring to Fig. B-B, install the rear arm and the shock absorber to the frame.
•
Insert the bolt from the left of the vehicle.
•
Install the nut to the specified torque. (Tightening torque: 44 Nm, 4.4 m·kg)
•
Install the relay arms with the characters “5SL” visible from the left of the
vehicle.
•
Apply grease to the outer surface of the collar with the character side outward.
•
Install the oil seal with the character side outward.
Parts List
No. PART No. PART NAME Q'TY REMARKS
1 5SL-22110-01 RR.ARM COMP. 1
2 5EB-22184-00 BUSH 1
3 93317-42550 BRG. 1
4 93315-42536 BRG. 1
5 4FN-22141-00 SHAFT,PIVOT 1
6 5PW-22125-00 BOLT 1
7 90185-18104 NUT,SELF-LOCKING 1
8 90201-186M4 WASHER,PLAIN 1
9 5JJ-22128-00 COVER,1 2
10 5SL-22210-00 SHOCK ABSORBER 1
11 5SL-22219-00 BRKT.,UPR. 1
12 95607-14200 NUT,U FLANGE 1
13 90105-10017 BOLT,FLG. 4
14 95607-10200 NUT,U FLANGE 5
15 5SL-2217A-00 ARM,RELAY 1 2
16 90387-1012A COLLAR 4
17 93315-41762 BRG. 1
18 93109-17071 SEAL,OIL 6
19 5SL-2217M-00 ARM,1 1
11 13 14
10
10 12
6
1 5
6
3
4
5
9
7 8
13
14
15
16
18
WWW.PlandeGraissage.ORG